Multi-gat metaal kabel gland
Multi-gat metaal kabel gland
Inleiding
Kabelkliere word hoofsaaklik gebruik om kabels vas te klem, vas te maak en te beskerm teen water en stof. Hulle word wyd toegepas op velde soos beheerborde, apparate, ligte, meganiese toerusting, treine, motors, projekte, ens.Ons kan jou voorsien van multi-gat metaal kabelkliere gemaak van vernikkelde koper (Bestelling No.: HSM/nxd), vlekvrye staal (Bestel No.: HSMS/nxd) en aluminium (Bestel No.: HSMAL/nxd).
Nxd: N verwys na aantal gate, D verwys na gatdeursnee.
Materiaal: | Liggaam: vernikkelde koper; seël: poliamied; verseëling: gemodifiseerde rubber |
Temperatuurreeks: | Min -40℃,Maksimum 100℃,Korttermyn 120℃ |
Beskermingsgraad: | IP68 met geskikte O-ring binne gespesifiseerde klemreeks |
Eienskappe: | Weerstand teen vibrasie en impak, in ooreenstemming met IEC-60077-1999. |
Aansoeke: | Masjiengebou, elektriese toerusting, elektriese beheerkas |
Sertifiserings: | CE |
Spesifikasie
(Kontak ons asseblief vir meer inligting as jy ander groottes benodig wat nie by die volgende lys ingesluit is nie.)
[Metrieke/Pg/Npt/G-draad is beskikbaar.]
Vernikkelde koper kabelgland (metrieke draad) | |||||||
Artikelnr. | Draad | Gat grootte | AG | GL | H | SW1/SW2 | Pakkie |
| Dimensie | mm | mm | mm | mm | mm | eenhede |
HSM-M16/4×1.4 | M16×1,5 | 4×1,4 | 16 | 7 | 21 | 17/18 | 75 |
HSM-M16/2×3 | M16×1,5 | 2×3 | 16 | 7 | 21 | 17/18 | 75 |
HSM-M18/2×3 | M18×1,5 | 2×3 | 18 | 7 | 21 | 17/20 | 32 |
HSM-M18/4×3 | M18×1,5 | 4×3 | 18 | 7 | 22.5 | 20/20 | 32 |
HSM-M18/2×4.5 | M18×1,5 | 2×4,5 | 18 | 7 | 22.5 | 20/20 | 32 |
HSM-M20/3×2.5 | M20×1,5 | 3×2,5 | 20 | 7 | 23 | 20/22 | 32 |
HSM-M20/6×3 | M20×1,5 | 6×3 | 20 | 7 | 23.5 | 22/22 | 32 |
HSM-M20/3×4 | M20×1,5 | 3×4 | 20 | 7 | 23.5 | 22/22 | 32 |
HSM-M20/2×5 | M20×1,5 | 2×5 | 20 | 7 | 23.5 | 22/22 | 32 |
HSM-M25/4×6 | M25×1,5 | 4×6 | 25 | 7 | 26 | 30/30 | 18 |
HSM-M25/3×7 | M25×1,5 | 3×7 | 25 | 7 | 26 | 28/30 | 18 |
HSM-M25/2×8 | M25×1,5 | 2×8 | 25 | 7 | 26 | 28/30 | 18 |
HSM-M32/6×6.5 | M32×1,5 | 6×6,5 | 32 | 8 | 33 | 40/40 | 8 |
HSM-M32/4×9 | M32×1,5 | 4×9 | 32 | 8 | 33 | 40/40 | 8 |
HSM-M40/5×9 | M40×1,5 | 5×9 | 40 | 9 | 38,5 | 50/50 | 4 |
HSM-M40/7×9 | M40×1,5 | 7×9 | 40 | 9 | 38,5 | 50/50 | 4 |
*HSM-M40/6×8 | M40×1,5 | 6×8 | 40 | 9 | 38,5 | 50/50 | 4 |
HSM-M40/2×15 | M40×1,5 | 2×15 | 40 | 9 | 38,5 | 50/50 | 4 |
*HSM-M63/8×10 | M63×1,5 | 8×10 | 63 | 10 | 41 | 58/70 | 2 |
HSM-M63/6×12 | M63×1,5 | 6×12 | 63 | 10 | 41 | 58/70 | 2 |
HSM-M63/4×19 | M63×1,5 | 4×19 | 63 | 10 | 44,5 | 75/75 | 2 |
|
|
|
|
|
|
|
|
Vernikkelde koper kabelgland (PG draad) | |||||||
Artikelnr. | Draad | Gat grootte | AG | GL | H | SW1/SW2 | Pakkie |
| Dimensie | mm | mm | mm | mm | mm | eenhede |
*HSM-P09/4×1.4 | PG9 | 4×1,4 | 15.2 | 7 | 22 | 17/17 | 75 |
HSM-P09/2×3 | PG9 | 2×3 | 15.2 | 7 | 21 | 17/17 | 75 |
HSM-P11/2×3 | PG11 | 2×3 | 18.6 | 7 | 21 | 17/20 | 32 |
*HSM-P11/2×4.5 | PG11 | 2×4,5 | 18.6 | 7 | 22.5 | 20/22 | 32 |
*HSM-P13.5/3×2 | PG13.5 | 3×2 | 20.4 | 7 | 23 | 22/22 | 32 |
HSM-P13.5/6×3 | PG13.5 | 6×3 | 20.4 | 7 | 24 | 22/22 | 32 |
HSM-P13.5/3×4 | PG13.5 | 3×4 | 20.4 | 7 | 23.5 | 22/22 | 32 |
*HSM-P16/3×3 | PG16 | 3×3 | 22.5 | 7 | 23 | 22/24 | 32 |
* HSM-P16/3×4 | PG16 | 3×4 | 22.5 | 7 | 23 | 24/24 | 32 |
HSM-P16/4 ×4 | PG16 | 4×4 | 22.5 | 7 | 23 | 24/24 | 32 |
HSM-P16/5×4 | PG16 | 5×4 | 22.5 | 7 | 23 | 24/24 | 32 |
HSM-P16/6×4 | PG16 | 6×4 | 22.5 | 7 | 23 | 24/24 | 32 |
HSM-P16/2×6 | PG16 | 2×6 | 22.5 | 7 | 23 | 24/24 | 32 |
HSM-P21/4×6 | PG21 | 4×6 | 28.3 | 7 | 26 | 30/30 | 18 |
HSM-P21/3×7 | PG21 | 3×7 | 28.3 | 7 | 26 | 30/30 | 18 |
HSM-P21/2×8 | PG21 | 2×8 | 28.3 | 7 | 26 | 30/30 | 18 |
HSM-P29/6×6.5 | PG29 | 6×6,5 | 37 | 8 | 33 | 36/40 | 8 |
HSM-P29/4×9 | PG29 | 4×9 | 37 | 8 | 33 | 40/40 | 8 |
HSM-P36/5×9 | PG36 | 5×9 | 47 | 9 | 38,5 | 50/50 | 4 |
HSM-P36/7×9 | PG36 | 7×9 | 47 | 9 | 38,5 | 50/50 | 4 |
*HSM-P36/6×8 | PG36 | 6×8 | 47 | 9 | 38,5 | 50/50 | 4 |
HSM-P36/2×15 | PG36 | 2×15 | 47 | 9 | 38,5 | 50/50 | 4 |
*HSM-P48/8×10 | PG48 | 8×10 | 59,3 | 10 | 41,5 | 58/65 | 2 |
HSM-P48/6×12 | PG48 | 6×12 | 59,3 | 10 | 41,5 | 65/65 | 2 |
HSM-P48/3×18 | PG48 | 3×18 | 59,3 | 10 | 41,5 | 65/65 | 2 |